|
|
|
Dr. Rajan Ambat
Associate Professor
Celcorr/CreCon - Manager
Section of Materials and Surface Engineering
Building 425, Room 026
Department of Mechanical Engineering
Technical University of Denmark
DK 2800 Kgs. Lyngby, Denmark
Tel: +45 4525 2181
Fax: +45 4593 6213
E-mail:
ram@mek.dtu.dk
Visit: http://www.corrosionandsurfacetechnology.dk/
|
|
|
Dr. Morten S. Jellsen
Senior Scientist
Celcorr/CreCon - Project co-ordinator
Section of Materials and Surface Engineering
Building 425, Room 028
Department of Mechanical Engineering
Technical University of Denmark
DK 2800 Kgs, Lyngby, Denmark
Tel: +45 4525 2213
Fax: +45 4593 6213
Email: msj@mek.dtu.dk
Visit: http://www.corrosionandsurfacetechnology.dk/
|
|
|
Dr. Per Møller
Professor
Section of Materials and Surface Engineering
Building 425
Department of Mechanical Engineering
Technical University of Denmark
DK 2800 Kgs, Lyngby, Denmark
Tel: +45 4525 4830
Fax: +45 4593 6213
Email:
pm@mek.dtu.dk
Visit: http://www.corrosionandsurfacetechnology.dk/ |
|
|
Vadimas Verdingovas
PhD student
Section of Materials and Surface Engineering
Building 425
Department of Mechanical Engineering
Technical University of Denmark
DK 2800 Kgs, Lyngby, Denmark
Tel:
Fax: +45 4593 6213
Email: S091479@student.dtu.dk
Visit: http://www.corrosionandsurfacetechnology.dk/ |
|
|
Mondira Dutta
Lab Engineer
Section of Materials and Surface Engineering
Building 425
Department of Mechanical Engineering
Technical University of Denmark
DK 2800 Kgs, Lyngby, Denmark
Tel:
Fax: +45 4593 6213
Email:
Visit: http://www.corrosionandsurfacetechnology.dk/
|
Master Thesis Students:
Bjørn Duus Mikkelsen (Electronic corrosion and corrosion classes)
Thomas Jensen, (Conformal coatings for corrosion protection)
Past Members:
Dr. Umadevi Rathinavelu, Completed PhD in 2011
Dr. Daniel Minzari, Completed PhD in 2010
Anders Bruhn, MSc thesis 2010
Marianna Johnson, MSc thesis 2009
Pernille Holm, BSc thesis 2009
Stine Gardner, MSc thesis 2088
Peter Westermann, MSc thesis 2009
|
|
Formation of AgS during corrosion of Ag contacts in suphur environments
|
|
Surface morphology of end terminals of chip resistor
Dendrite growth on a chip resistor
Branched dendrites during eletrochemical migration
Formation of dendrite under humid condition due to ECM under conformal coating due to the presence of flux residue.
|
Opening of re-flow flux residue during exposure to humid atmosphere. This could lead to delayed decrease in Surface Insulation Resistance |